Phase 2 Dynamic Mapping
Namun disini kita masuk ke bab Phase 2 Dynamic Mapping, karena di lab sebelumnya kita masih membahas Phase 1 Dynamic mapping..
Karena ini adalah lab lanjutan dari sebelumnya, jadi saya hanya melakukan konfigurasi yang hanya pada lab ini saja.. kalo temen - temen ingin melihat konfigurasi sebelumnya.. temen - temen bisa lihat dari link dibawah :
👉https://insinyurbocah2109.blogspot.com/2020/11/belajar-vpn-gre-tunnel.html
BELAJAR VPN ( GRE TUNNEL ) - Lab 1 VPN
👉https://insinyurbocah2109.blogspot.com/2020/11/belajar-vpn-ipsec-tunnel-mode.html
BELAJAR VPN ( IPSEC Tunnel Mode ) - Lab 2 VPN
👉https://insinyurbocah2109.blogspot.com/2020/11/belajar-bgp-dmvpn.html
BELAJAR VPN ( DMVPN ) - Lab 3 VPN
👉https://insinyurbocah2109.blogspot.com/2020/11/belajar-vpn-phase-1-dynamic-mapping.html
BELAJAR VPN ( Phase 1 Dynamic Mapping With EIGRP ) - Lab 4 VPN
👉https://insinyurbocah2109.blogspot.com/2020/11/belajar-vpn-phase-1-dynamic-mapping_9.html
BELAJAR VPN ( Phase 1 Dynamic Mapping With OSPF ) - Lab 5 VPN
https://insinyurbocah2109.blogspot.com/2020/11/belajar-vpn-phase-1-with-ipsec.html
BELAJAR VPN ( Phase 1 With IPsec )
Soo kita langsung ke konfigurasinya...
TOPOLOGI =
Sebelum melakukan konfigurasi nya... kita hapus dulu konfigurasi tunnel dan routingnya, Jika sudah, langsung aja ke konfigurasinyaa.....
R1
HUB(config)#int tu 0
HUB(config-if)#ip add 192.168.10.1 255.255.255.0
HUB(config-if)#
HUB(config-if)#
HUB(config-if)#tun mode gre multi
HUB(config-if)#tun sou 12.12.12.1
HUB(config-if)#
HUB(config-if)#ip nhrp network-id 1
HUB(config-if)#ip nhrp authen
HUB(config-if)#ip nhrp authentication IDN
HUB(config-if)#ip nhrp map multicast dynamic
HUB(config-if)#
HUB(config-if)#ex
HUB(config)#
R3
Spoke-1(config)#int tu 0
Spoke-1(config-if)#ip add 192.168.10.2 255.255.255.0
Spoke-1(config-if)#
Spoke-1(config-if)#
Spoke-1(config-if)#tu mod gre mult
Spoke-1(config-if)#tu sour 23.23.23.1
Spoke-1(config-if)#
Spoke-1(config-if)#
Spoke-1(config-if)#ip nhrp network-id 1
Spoke-1(config-if)#ip nhrp authen
Spoke-1(config-if)#ip nhrp authentication IDN
Spoke-1(config-if)#ip nhrp map 192.168.10.1 12.12.12.1
Spoke-1(config-if)#
Spoke-1(config-if)#ip nhrp nhs 192.168.10.1
Spoke-1(config-if)#ip nhrp map mult
Spoke-1(config-if)#ip nhrp map multicast 12.12.12.1
Spoke-1(config-if)#exit
Spoke-1(config)#
R4
Spoke-2(config)#int tu 0
Spoke-2(config-if)#
Spoke-2(config-if)#ip add 192.168.10.3 255.255.255.0
Spoke-2(config-if)#tu mod gre multipo
Spoke-2(config-if)#tun sou 24.24.24.1
Spoke-2(config-if)#
Spoke-2(config-if)#ip nhrp network-id 1
Spoke-2(config-if)#ip nhrp authent
Spoke-2(config-if)#ip nhrp authentication IDN
Spoke-2(config-if)#
Spoke-2(config-if)#
Spoke-2(config-if)#ip nhrp map 192.168.10.1 12.12.12.1
Spoke-2(config-if)#ip nhrp nhs 192.168.10.1
Spoke-2(config-if)#ip nhrp map multicast 12.12.12.1
Spoke-2(config-if)#exit
Spoke-2(config)#
Terakhir kita tinggal pengecekkan.......
R1
HUB(config)#do sh dmvpn
Legend: Attrb --> S - Static, D - Dynamic, I - Incomplete
N - NATed, L - Local, X - No Socket
# Ent --> Number of NHRP entries with same NBMA peer
NHS Status: E --> Expecting Replies, R --> Responding, W --> Waiting
UpDn Time --> Up or Down Time for a Tunnel
Interface: Tunnel0, IPv4 NHRP Details
Type:Hub, NHRP Peers:2,
# Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb
----- --------------- --------------- ----- -------- -----
1 23.23.23.1..........................192.168.10.2 UP 00:26:05 D
1 24.24.24.1 192.168.10.3 UP 00:23:50 D
R1
HUB#show ip nhrp
192.168.10.2/32 via 192.168.10.2
Tunnel0 created 00:26:09, expire 01:33:50
Type: dynamic, Flags: unique registered used
NBMA address: 23.23.23.1
192.168.10.3/32 via 192.168.10.3
Tunnel0 created 00:23:54, expire 01:36:05
Type: dynamic, Flags: unique registered used
NBMA address: 24.24.24.1
R1
HUB(config)#do show ip nhrp brief
Target Via NBMA Mode Intfc Claimed
192.168.10.2/32 192.168.10.2 .................... 23.23.23.1 dynamic Tu0 < >
192.168.10.3/32 192.168.10.3 24.24.24.1 dynamic Tu0 < >
DONE....😊😊😊😊
TERIMAKASIH
WASSALAMUALAIKUM WR.WB
0 comments:
Post a Comment